SICK IM08-03BPS-ZT1 (6025574)

• Triple operating distance up to 6 mm
• Operating temperature from -25 °C to +70 °C
• High switching frequencies
• Sizes M8

Your benefits

• Reduced machine downtime and maintenance costs
• Large operating reserve due to triple operating distance improves machine throughput - no missed targets
• Saves installation space on the machine. Less space required for the same operating distance when compared with standard sensors
• Lower risk of mechanical damage due their ability to be mounted further from the target
• High level of sensitivity makes them suitable for detecting difficult parts such as wires, thin sheets, small screws – reduces design and installation time

Features

Housing:	Cylindrical
Thread size:	M8 x 1
Sensing range Sn:	3 mm
Assured sensing range Sa:	2.43 mm
Installation type:	Quasi-flush 1)
Switching frequency:	1,000 Hz
Output type:	PNP
Output function:	NO
Electrical wiring:	DC 3-wire
Enclosure rating:	IP 67 2)
Connection type:	Connector M8, 3-pin
Housing:	Standard
1) When installed in conductive materials, sensors must protrude by distance A (A = 1 mm)  2) According to EN 60529
Mechanics/electronics
Supply voltage:	10 V DC ... 30 V DC
Ripple:	≤ 20 % 1)
Voltage drop:	≤ 2 V 2)
Power consumption:	≤ 10 mA 3)
Time delay before availability:	≤ 50 ms
Hysteresis:	1 % ... 15 %
Repeatability:	≤ 5 % 4) 5)
Temperature drift (of Sr):	± 10 %
EMC:	According to EN 60947-5-2
Output current Ia:	≤ 200 mA
Short-circuit protection:
Reverse polarity protection:
Power-up pulse protection:
Shock/vibration:	30 g, 11 ms / 10 ... 55 Hz, 1 mm
Adjustment indicator:	6)
Ambient operating temperature:	-25 °C ... 70 °C
Housing material:	Metal, Chrome-plated brass
Housing cap material:	Plastic, PBTP
Housing length:	60 mm
Thread length:	45.5 mm
Tightening torque, max.:	≤ 4 Nm
1) Of VS  2) At Ia max  3) Without load  4) Of Sr  5) UB = 20 V DC ... 30 V DC, TA = 23 °C ± 5 °C  6) LED lights continuously (0 = s = 0.8 Sr); LED flashing (0.8 Sr < s = Sr)
Reduction factors
Note:	The values are reference values which may vary
Copper (Cu):	Ca. 0.27
Aluminum (Al):	Ca. 0.33
Brass (Br):	Ca. 0.41
Stainless steel (V4A, 316L):	Ca. 0.72
Installation note
A:	2 mm
B:	8 mm
C:	8 mm
D:	9 mm
E:	1 mm
F:	30 mm
Remark:	Associated graphic see "Installation"